| Isotek GII Nova (Call for Pricing!) |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Products: |
Audio Systems & Components for the Music Lover |
| MAIN: 847-356-5161 FAX: 847-265-9459 CELL: 224-577-5161 Email: ja-info@jamnaudio.com |
Specifications:
The following information relates only to the IsoTek GII Nova. These are original
products and should not be confused with past models or ‘copy cat’ products.
Number of outlets: 6 standard
Type of outlets available: 13A UK unswitched / European / U.S.
Mains inlet: 16 Amp Neutrik
Mains voltage: 110 - 264 VAC
Maximum currenti: 16 Amps continuous
Total Power at 230V: (Nominal) 3,680 Watts
(Continuous rating of Titan circuit) 4,600 Watts
(Transient capability 10 milliseconds) 23,000 Watts
Total Power at 115V: (Nominal) 1,840 Watts
(Continuous rating of Titan circuit) 2,300 Watts
(Transient capability 10 milliseconds) 11,500 Watts
Fusing: Electronic Overcurrent device (16Amps, with addition suppression
filtering). 30 milliamp earth linkage protection, this allows use on radial
circuits not protected by RCDs, allowed under British regulations as a
cooker circuit
Dimensions: 435mm x 136mm x 360mm (WxHxD)
Weight (boxed): 12 Kg
The following information relates only to the IsoTek GII Nova. These are original
products and should not be confused with past models or ‘copy cat’ products.
Number of outlets: 6 standard
Type of outlets available: 13A UK unswitched / European / U.S.
Mains inlet: 16 Amp Neutrik
Mains voltage: 110 - 264 VAC
Maximum currenti: 16 Amps continuous
Total Power at 230V: (Nominal) 3,680 Watts
(Continuous rating of Titan circuit) 4,600 Watts
(Transient capability 10 milliseconds) 23,000 Watts
Total Power at 115V: (Nominal) 1,840 Watts
(Continuous rating of Titan circuit) 2,300 Watts
(Transient capability 10 milliseconds) 11,500 Watts
Fusing: Electronic Overcurrent device (16Amps, with addition suppression
filtering). 30 milliamp earth linkage protection, this allows use on radial
circuits not protected by RCDs, allowed under British regulations as a
cooker circuit
Dimensions: 435mm x 136mm x 360mm (WxHxD)
Weight (boxed): 12 Kg
Product Introduction
The Nova is our SubStation replacement. Unlike its predecessor there are no
complex power requirement calculations to establish prior to installing the unit.
Nova also dispense with the SubStations isolation transformer based filtering
system which unless properly understood had the potential to restrict the
dynamic delivery of an audio system.
suitable for medium to high-end systems, for those audiophiles seeking a
suitable for medium to high-end systems, for those audiophiles seeking a
cost-no-object power management system use the Nova in conjunction with a
Titan (for power amplifiers) for ultimate performance.
Titan (for power amplifiers) for ultimate performance.
Features
The new Nova dispenses with isolation transformer technology in favour of a
direct-coupled design with a nine-stage series and parallel filter configuration.
This is optimised for a high degree of common mode rejection, with the
highest possible differential mode rejection compatible with low insertion
losses. Great care has been taken to minimise insertion loss at mains
frequency. Another asset of an isolation transformer would be a balanced
supply, however the new circuit also offers these desirable characteristics,
especially at high frequencies where it could be debated it possesses
superior performance.
To ensure the Nova has enough power delivery for an entire audio system
two things out of the ordinarily have been achieved. The minimum constant
running ability of the device is rated at over 4,600 watts. Secondly, the unit is
fitted with an RCBO, this high tech electronic fusing offers huge transient
overloads whilst remaining safe. It also has the added bonus of protecting
power cords against long term overload conditions.
Placement
The Nova can be placed either on a dedicated shelf of an equipment support
rack. Adequate ventilation should be given to the unit, therefore we would not
recommend that it is covered or enclosed in a very tight space. It is also
recommended that the unit is not used outside or in areas susceptible to
damp conditions.
Equipment Coupling
The Nova has been designed specifically for complete audio or audio visual
system requirements where high current delivery becomes an issue. Nova is
so powerful in terms of transient ability that it is only limited by the network it is
plugged into, therefore if possible we would recommend a dedicated supply
be installed; we will be posting additional information on this in the future. At
the rear of the Nova chassis are six high quality unswitched outlets, these can
be used for ALL components including high current devices. Nova is also
available in U.S. and European specification, to find a distributor in your
country click 'Where To Buy'.
System Integration
The Nova should be used with its supplied power cord. Should users wish to
change this for their own preferred brand the cable MUST be rated with a
minimum of 16Amps. We strongly recommend that a good quality mains cable
be used throughout your system. Look for a cable with good conductors, for
example oxygen free copper, this cable should also possess a high degree of
shielding from RFI.
The Nova is our SubStation replacement. Unlike its predecessor there are no
complex power requirement calculations to establish prior to installing the unit.
Nova also dispense with the SubStations isolation transformer based filtering
system which unless properly understood had the potential to restrict the
dynamic delivery of an audio system.
suitable for medium to high-end systems, for those audiophiles seeking a
suitable for medium to high-end systems, for those audiophiles seeking a
cost-no-object power management system use the Nova in conjunction with a
Titan (for power amplifiers) for ultimate performance.
Titan (for power amplifiers) for ultimate performance.
Features
The new Nova dispenses with isolation transformer technology in favour of a
direct-coupled design with a nine-stage series and parallel filter configuration.
This is optimised for a high degree of common mode rejection, with the
highest possible differential mode rejection compatible with low insertion
losses. Great care has been taken to minimise insertion loss at mains
frequency. Another asset of an isolation transformer would be a balanced
supply, however the new circuit also offers these desirable characteristics,
especially at high frequencies where it could be debated it possesses
superior performance.
To ensure the Nova has enough power delivery for an entire audio system
two things out of the ordinarily have been achieved. The minimum constant
running ability of the device is rated at over 4,600 watts. Secondly, the unit is
fitted with an RCBO, this high tech electronic fusing offers huge transient
overloads whilst remaining safe. It also has the added bonus of protecting
power cords against long term overload conditions.
Placement
The Nova can be placed either on a dedicated shelf of an equipment support
rack. Adequate ventilation should be given to the unit, therefore we would not
recommend that it is covered or enclosed in a very tight space. It is also
recommended that the unit is not used outside or in areas susceptible to
damp conditions.
Equipment Coupling
The Nova has been designed specifically for complete audio or audio visual
system requirements where high current delivery becomes an issue. Nova is
so powerful in terms of transient ability that it is only limited by the network it is
plugged into, therefore if possible we would recommend a dedicated supply
be installed; we will be posting additional information on this in the future. At
the rear of the Nova chassis are six high quality unswitched outlets, these can
be used for ALL components including high current devices. Nova is also
available in U.S. and European specification, to find a distributor in your
country click 'Where To Buy'.
System Integration
The Nova should be used with its supplied power cord. Should users wish to
change this for their own preferred brand the cable MUST be rated with a
minimum of 16Amps. We strongly recommend that a good quality mains cable
be used throughout your system. Look for a cable with good conductors, for
example oxygen free copper, this cable should also possess a high degree of
shielding from RFI.
Key Features
9 stage direct coupled filter system for maximum filtering with minimum insertion loss
GII design featuring 'Polaris-X' technology
Full component from component isolation
Virtually unlimited power for all components
Plug in & play installation
Over current protection
Sophisticated electronic fuse to IsoTek specification
Earth leakage protection
6 high quality unswitched outlets
9 stage direct coupled filter system for maximum filtering with minimum insertion loss
GII design featuring 'Polaris-X' technology
Full component from component isolation
Virtually unlimited power for all components
Plug in & play installation
Over current protection
Sophisticated electronic fuse to IsoTek specification
Earth leakage protection
6 high quality unswitched outlets