Audio Systems & Components for the Music Lover |
| Modwright - SWLP9.0SE Preamp with Phono |
SWLP 9.0SE - $3995 ($4495 with tube rectified power supply) - Available in Silver, Black or new 'Blu' finish!
In keeping with the ModWright tradition of exceptional value, performance and service, the SWLP 9.0SE represents a benchmark for
high-performance full function preamp with on-board Class A MM/MC tube phono stage.
Technical Specifications:
Tube Complement: (2)6C45's, (2)6N1P's, (2)5686 tubes.
Gain: 68dB Max MC gain. Variable gain.
Stereo/Mono Switch on front panel.
Variable Cartridge loading for MM/MC.
Output Impedance: ~600ohm.
Frequency Response: 20Hz – 50Khz +/-1dB
Weight: 33 lbs. (38 lbs. shipped).
Dimensions: 17”W x 12”D x 4”H (preamp).
8"W x 10"D X 4"H (external power supply).
Basic Specifications:
(2) sets of switchable phono inputs (MM & MC) with cartridge loading for MM/MC (internal dip switch settings).
(5) Standard inputs: CD, Tuner, DVD, HT/BP, Aux. 1
Mute, Power, Stereo/Mono, HT/BP (Home Theater Bypass) and volume control via front panel controls.
Remote Control volume and mute.
Design Information:
Power Supply: Choke input current regulation, DC heaters, discrete B+ voltage regulation and tube rectified B+ supply (optional -
standard unit comes with SS rectifier).
MC Gain Stage: Tube-Fet hybrid.
2nd Gain and line stages use mu circuit topology*.
Power Sequence: Mute-on delay turn-on sequence with soft-start B+ supply.
Design Philosophy:
The SWLP 9.0SE is designed to offer the Audiophile, World-Class preamplifier performance, including a Class A phono stage with
outboard power supply.
The unit is voiced to offer a full, fast and accurate recreation of the entire frequency range. Bass is deep, tight and authoritative and
high frequencies sparkle. The tube rectified supply (optional) adds liquidity and holographic imaging.
Great care was taken to minimize all noise in the signal, even at high gain levels. This is due to attention to shielding, grounding and
power supply design.
The tube complement was chosen to provide high-current, lower noise and low distortion. The 6C45, 6N1P and 5687 all complement
the design in this respect and offer an exceptional level of performance.
Top quality parts are used throughout, including Schottky diodes, metal film Vishay resistors, ceramic tube sockets and hiqh-quality
polypropylene and teflon film caps in signal path applications insure exceptional performance.
In keeping with the ModWright tradition of exceptional value, performance and service, the SWLP 9.0SE represents a benchmark for
high-performance full function preamp with on-board Class A MM/MC tube phono stage.
Technical Specifications:
Tube Complement: (2)6C45's, (2)6N1P's, (2)5686 tubes.
Gain: 68dB Max MC gain. Variable gain.
Stereo/Mono Switch on front panel.
Variable Cartridge loading for MM/MC.
Output Impedance: ~600ohm.
Frequency Response: 20Hz – 50Khz +/-1dB
Weight: 33 lbs. (38 lbs. shipped).
Dimensions: 17”W x 12”D x 4”H (preamp).
8"W x 10"D X 4"H (external power supply).
Basic Specifications:
(2) sets of switchable phono inputs (MM & MC) with cartridge loading for MM/MC (internal dip switch settings).
(5) Standard inputs: CD, Tuner, DVD, HT/BP, Aux. 1
Mute, Power, Stereo/Mono, HT/BP (Home Theater Bypass) and volume control via front panel controls.
Remote Control volume and mute.
Design Information:
Power Supply: Choke input current regulation, DC heaters, discrete B+ voltage regulation and tube rectified B+ supply (optional -
standard unit comes with SS rectifier).
MC Gain Stage: Tube-Fet hybrid.
2nd Gain and line stages use mu circuit topology*.
Power Sequence: Mute-on delay turn-on sequence with soft-start B+ supply.
Design Philosophy:
The SWLP 9.0SE is designed to offer the Audiophile, World-Class preamplifier performance, including a Class A phono stage with
outboard power supply.
The unit is voiced to offer a full, fast and accurate recreation of the entire frequency range. Bass is deep, tight and authoritative and
high frequencies sparkle. The tube rectified supply (optional) adds liquidity and holographic imaging.
Great care was taken to minimize all noise in the signal, even at high gain levels. This is due to attention to shielding, grounding and
power supply design.
The tube complement was chosen to provide high-current, lower noise and low distortion. The 6C45, 6N1P and 5687 all complement
the design in this respect and offer an exceptional level of performance.
Top quality parts are used throughout, including Schottky diodes, metal film Vishay resistors, ceramic tube sockets and hiqh-quality
polypropylene and teflon film caps in signal path applications insure exceptional performance.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Products: |
| MAIN: 847-356-5161 FAX: 847-265-9459 CELL: 224-577-5161 Email: ja-info@jamnaudio.com |
